EMAK OM124J Owner's Manual download pdf (Page 17)

MACHINE CONTROL ENGLISH

6.1.8 CRUISE CONTROL SWITCH

The cruise control switch is installed in the machine depending on the model.

6.1.9 AUT/MAN SWITCH

The AUT/MAN (AUTOMATIC-MANUAL) switch is installed in the machine dependending on the model. When set to the "MAN" position, it is disen-

gaged from operation and the mowed mass may accumulate in the discharge tunnel. This is why the "MAN" position is only intended for short-term use at

the end of mowing of very small remainders of area. When it is set to the "AUT" position, the function of mowing is automatically switched off once the

grass collection bin is full.

Position Grass collection bin is full Mowing mechanism

AUT NO ON

AUT YES OFF

MAN NO ON

MAN YES ON

6.1.10 GRASS COLLECTION BIN EMPTYING SWITCH

The switch of the grass collection bin dumping is installed in the machine depending on the model.

The switch has two positions:

- LIFTING

- LOWERING

The end positions of the bin in the lifted or normal position are secured with a safety clutch.

When lifting or lowering the bin, keep the switch pressed. As soon as the end position is reached,

release the switch immediately, otherwise the electrical installation can breakdown.

6.1.11 BRAKE

When the brake pedal is fully stepped on, the mowing machine is brought to a stop.

Never use the brake simultaneously with the travel function – threat of damage to the gearbox.

6.1.12 PARKING LEVER

The parking brake lever has 2 positions. Before shifting the lever into "B" position, step

on the brake pedal. Lock the lever in "B" position by rotating it slightly.

To disengage the parking brake, step on the brake pedal, which causes the the brake lever

latch to be automatically released.

A OFF

BON

6.1.13 TRAVEL PEDAL

It controls the drive of wheels and machine travel speed in both directions.

Forward drive: Step on the pedal slowly with the tip of the footin the "F“ direction.

The speed depends on the degree of stepping down on the pedal and vice versa.

Backward drive: Step on the pedal slowly with the heel in the "R“ direction.

The speed depends on the degree of stepping down on the pedal and vice versa.

As soon as the pedal is released, it automatically returns to the "N“ (neutral)

position and the machine stops. The travel pedal is equipped with a safety switch

which will prevent from starting the engine if the pedal is stepped on.

WARNING !!!

Change in the drive direction is only possible once the machine has stopped.

WARNING !!!

Cruise control only worksif the ignition is on. You may switch off cruise control by pressing

on the break pedal or by turning the switch off. Only use cruise control for long and direct travel only.

Before any change in travel direction, switch the cruise control off with the switch.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 29 30

Comments to this Manuals

No comments

EMAK OM124J Owner's Manual Page 17

Comments to this Manuals

Related products and manuals for Lawnmowers EMAK OM124J