EMAK OM124J User Manual download pdf (Page 33)

(11) MOWING MECHANISM HEIGHT ADJUSTMENT LEVER

This lever sets the height of the mowing mechanism from the ground.

The lever has 7 working positions for cutting heights from 3 to 9 cm.

The higher the lever’s position number, the taller the grass will be after

cutting.

When driving the machine without mowing, the lever must be set to 7.

(12) BYPASS LEVER – FREE MOVEMENT OF REAR WHEELS

The bypass lever is for cutting off power to the rear wheels so that the machine can be pushed or pulled

without the engine. Depending on the transmission used, it is located either behind the left rear wheel

(TT46) or in front of the left rear wheel (TT62). It has the following two positions:

Position Rear-wheel drive Use

(0) OFF When pushing the machine, the engine idles

(1) ON When driving, the engine is running

4.2.2 OPTIONAL CONTROLS

(1) STARTER

For cold starting the engine.

Machines with engines BS15, BS17, KO15, TE17 and HO16 are not equipped

with separate starters.

(2) BUZZER

The buzzer gives off an audible signal when the grass catcher is full.

After the audio signal that the catcher is full, power to the mowing mechanism is not shut

off!

(3) ENGINE HOUR GAUGE

The engine hour gauge operates only when the ignition is on and the seat switch

is engaged (automatically by the operator’s weight).

- Unauthorized modification of the gauge will void the warranty.

- If the counter breaks down, contact your service centre immediately.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 53 54

No comments

EMAK OM124J User Manual Page 33